Swann Extension 30m Cable CCTV Extension Cable 30 Metres with DC - SW271-S30

 

So you have just purchased a CCTV Kit and the supplied cables are not long enough.  This Swann 30 Metre Cable can be used on its own OR to join to the 18 metre cable to make it 48 metres as it comes with a joiner.

Cameras to suit.

There are so many Swann cameras this cable can suit, here is a list - but we may have missed a few:

• PNP150, Pro 530, 560, 580, 600, 660, 661, 670, 671, 680, 681, 650, 690, 746, 750, 780, 781, 770, 771, 760, 761, 790 and more.... and any other camera that has a BNC (Push and turn connector) end.
• Special note - for the PTZ cameras or cameras that come with an on screen controller, you will need to run an additional data connection in order to use these functions.  You could use the Cat5 cable we have available on the site..  Remember on screen controllers are only used once when setting up the camera, so it is only the PTZ cameras that will need the extra cable to control the PTZ control. - so in summary, if you are going to extend a PTZ camera, you will need to purchase CAT5 cable or use any 2 conductor cable (bell wire for example).

 

Description:

30m BNC to BNC Cable (Male to Male) with Integrated DC.

This cable can be joined to the black cables that come with the kit or used on its own.  Using the supplied female to female joiner will extend the other cable.

 

Try not to exceed 70 metres using joined cables.  For longer runs a call to us would be suggested so we can explain your options.

 

This cable will extend the Video and the Power. 

• BNC Male to BNC Male for Video (use joiner to make the male a female to extend cable)
  
• DC Plug to DC Socket
  

 

SW271-S30

Features:

• Double shielded with aluminum foil insulation plus braiding
• DC power cable (tear away) integrated with co-ax
• Includes male and female DC connectors and male-to-male BNC RG59 connectors
• Low interference, low noise, low magnetic field
• Weatherproof design

NOTE: Includes a Female - Female Extension joiner